Not enough USB controller resources error on Windows 11/10

Download PC Repair Tool to speedily find & fix Windows errors automatically

USB is now being used in all devices. USB A is leading with most devices based on it. Peripherals similar Pen Drives, External Hard disks, and more employ a USB port. USB C is coming upwards to be the side by side big standard in the computing world due to its high transfer speeds, wider compatibility, and support for external Graphics Processing Units. Yet, USB 3.0 ports take been reported to be causing the following mistake to appear on Windows 11/10 whenever a USB device is plugged in:

Not enough USB controller resources, The controller does not take enough resources for this device.

Not enough USB controller resources

In this commodity, nosotros will exist discussing the probable fixes for this event:

Utilise a lower generation USB port.
Utilise a dock.
Disable the xHCI Mode option in BIOS.
Reinstall the Universal Serial Bus Controller drivers.
Run USB Troubleshooter.

1] Employ a lower generation USB port

This result mostly occurs when a device is continued to a USB three.0 port. Yous tin can endeavour to plug in your device to a USB 2.0 port and check if that fixes your issues.

You can place a USB 3.0 port like the 1 in blue as given in the image to a higher place. All other ports are of a lower generation.

2] Utilize a dock

Using a dock can too solve your issues. Because when too much power on laptops and notebooks are drawn from the USB ports and as a USB 3.0 port draws more ability than a USB two.0 port. Hence, plugging in your USB Device to a USB two.0 Port should brand you go rid of this fault.

3] Disable the xHCI Way option in BIOS

Boot your computer into the BIOS.

One time booted, go to the tab labeled asAvant-garde.

Nether the section ofUSB Configuration,make sure that the entry for xHCI Pre-kicking mode is gear up to beDisabled.

Save the changes and reboot your computer to Windows xi/10 and check if that stock-still your issues.

4] Reinstall the Universal Service Controller drivers

The main drivers that might be a cause for this particular file will be marked with a minor yellow exclamation marker iconwithin of the Device Manager. If not, wait out for sub-entries underUniversal Serial Bus controllersentry,and so nosotros suggest you Update these drivers and mainlyGeneric USB Hubcommuter.

Alternatively, y'all canUninstallthem and and thenRebootyour computer and allow Windows to reinstall them automatically.

5] Run USB Troubleshooter

Run the Hardware and Device Troubleshooter or the Windows USB Troubleshooter and cheque if it helps. The automated tools check the hardware or USB connection to the calculator for any known issues and fix them automatically.

Hope something helps!

Ayush has been a Windows enthusiast since the 24-hour interval he got his first PC with Windows 98SE. He is an active Windows Insider since Day ane and is now a Windows Insider MVP. He has been testing pre-release services on his Windows x PC, Lumia, and Android devices.